You can solve problems at your own factory! Encyclopedia of coolant filtration equipment "Kuraroka" " List of coolant filtration equipment manufacturers " Mosnick.

Mosnick.

Can solve grinding process problems
What is a coolant filtration device?

Information about the products of Mosnik, a manufacturer specializing in filters, coolant equipment, and drum filters. This section also includes information on what kind of company Mosnick is.

What is Mosnik's coolant filtration system?

Magnetic filter REAS [RE].

Combining a floor magnet system and a magnetic separator system, this filter is specially designed for magnetic materials, and features primary and secondary filtration capabilities in a single unit,Captures fine sludge and other particles that tend to settle in the coolant liquid without pumping up.

Filtration accuracy 15 to 20 μm
Process flow rate ~1,000 (L/min)
Supported oil types No information was found on the official website.
Chip material Magnetic materials (steel, FC)
Size No information was found on the official website.
Reference: Mosnick's official website (http://www.mosnic.co.jp/products/filter/re.html)

Drum filter RD III

Handles both magnetic and non-magnetic chips generated during cutting operationsA filter that can be A cylindrical roll drum is mounted inside the conveyor, and coolant fluid and chips are filtered by attaching media according to specifications.

Filtration accuracy 50 µm, 30 µm or more
Process flow rate ~1,000 (L/min)
Supported oil types No information was found on the official website.
Chip material Non-magnetic, magnetic (steel, FC)
Size No information was found on the official website.
Reference: Mosnick's official website (http://www.mosnic.co.jp/products/filter/drum.html)

Two-stage filter [RDF-Filcon-].

Two-stage filter consisting of a hinge filter for roughing and a drum filter for fine swarf processing and filtration.The use of a hinge conveyor enables the processing of curled chips, which have been avoided with conventional drum filters.

Filtration accuracy 50 µm, 30 µm or more
Process flow rate ~1,000 (L/min)
Supported oil types No information was found on the official website.
Chip material Non-magnetic, magnetic (steel, FC)
Size No information was found on the official website.
Reference: Mosnick's official website (http://www.mosnic.co.jp/products/filter/rdf.html)

Magnetic Filter [MF ]

A special filter for magnetic materials with a magnetic plate at the bottom of the conveyor and a connecting duct above it.The filter part is made of SUS products and permanent magnets, and no consumables are generated.

Filtration accuracy 50 μm or more
Process flow rate ~1,000 (L/min)
Supported oil types No information was found on the official website.
Chip material Magnetic materials (steel, FC)
Size No information was found on the official website.
Reference: Mosnick's official website (http://www.mosnic.co.jp/products/filter/mf.html)

Cyclone Filter MUTRON [MT] (Japanese only)

Cited from: http://www.mosnic.co.jp/products/filter/mt.html

This filter separates coolant liquid and sludge by generating a cyclone phenomenon in the filter through pumping. The filter is expected to extend the service life of the coolant liquid by reducing the frequency of tank cleaning.No consumable or replacement parts are required, reducing running costs.

Filtration accuracy 20 μm or more
Process flow rate ~500 (L/min)
Supported oil types No information was found on the official website.
Chip material Non-magnetic and magnetic materials (steel, FC) after primary treatment
Size No information was found on the official website.
Reference: Mosnick's official website (http://www.mosnic.co.jp/products/filter/mt.html)

Magnetic separator Magton [MGT].

Cited from: http://www.mosnic.co.jp/products/filter/mgt.html

Separator with high magnetic force using rare earth magnets. Magnets installed inside the drum capture and filter sludge in the coolant liquid.Suitable for honing and grinding magnetic materials, contributing to longer life and better quality of grinding wheels.

Filtration accuracy 10 μm or more
Process flow rate ~500 (L/min)
Supported oil types No information was found on the official website.
Chip material Magnetic materials (steel, FC) after primary treatment
Size No information was found on the official website.
Reference: Mosnick's official website (http://www.mosnic.co.jp/products/filter/mgt.html)

How to remove grinding sludge.
Read more

What is the right product selection that can solve the problem?

There is a wide variety of coolant filtration equipment on the market, but the important thing is to select a product that meets your company's challenges. This site introduces recommended products by issue.

What is the difference between products?
See how to choose the right coolant filtration system

Mosnick Case Studies

No information was found on the official website.

Process of contacting and introducing Mosnick

There was no description of the introduction or contact process on the official Mosnick website. However, there is an inquiry form in the official website, from which you can make inquiries, etc. If you need a catalog, you can download it upon request. The company is committed to security measures, such as the use of an encryption method for data transmission.

What kind of company is Mosnick?

A manufacturer specializing in coolant equipment, filtration equipment, swarf treatment, and drum filters, since 1986 we have established a global network of technical tie-ups with companies in the U.S., EU, Southeast Asia, and other countries.For after-sales maintenance, we utilize a network of affiliated companies and are ready to respond to a variety of needs.

Mosnick's Attitude Toward Customers

While continuing to take on the challenges of the unknown, Mosnik focuses on expanding the range of options for system creation based on the experience and wealth of know-how it has accumulated over the years. Through this approach to business, the company strives to continue to be a provider of services that meet a wide range of user needs.

The attitude of "We are a company that depends on the trust of our customers.We are committed to technological innovation without compromising the

Mosnick Company Profile

Head office location MMC Building, 1-17-1 Minamihonmachi, Minami-ku, Saitama-shi, Saitama
Phone number 048-710-1484
Official HP http://www.mosnic.co.jp/index.html
For grinding process】 【For grinding process】.
Coolant filtration system
Three recommendations

Coolant filtration equipment is used to filter sludge generated from equipment. There are a variety of products available depending on the intended use, so it is important to determine "whether the coolant filtration equipment is suitable for the purpose" and "whether the equipment is suited to the characteristics of sludge.

Filter filtration system capable of filtering all "fine" sludge of 3μm or less Filter filtration system capable of filtering all "fine" sludge of 3 microns or less
Sun Maintenance Koki
Reference: Sun Maintenance Koki official website (https://www.smk-web.co.jp/index.html)
Main materials that can be filtered
  • Brittle materials such as cemented carbide, ceramics, and castings
For factories like this
  • I want to filter fine sludge less than 3μ.
  • I want to use it as a secondary process
  • To remove sludge that could not be filtered by other equipment
Capable of filtering "large volumes" of up to 200 l/min Centrifuge
Toto Separator Kogyo Co.
Reference: Toto Separator Industry official website (https://centrifuge-tsk.com/)
Main materials that can be filtered
  • Brittle materials such as cemented carbide, ceramics, and castings
For factories like this
  • I want to filter more than 100 L
  • I want to use it as a primary process
  • Want to reduce running costs
High magnetic force filters 5 microns or less High magnetic force enables filtration of 5 microns or less. Magnetic Separator
Sumitomo Heavy Industries Finetech, Ltd.
Reference: Sumitomo Heavy Industries Finetech official website (https://www.shi-ftec.co.jp/)
Main materials that can be filtered
  • Metal materials such as aluminum, steel, and iron
For factories like this
  • I want to filter metal materials.
  • I want to use it as a primary process
  • I want to remove metal sludge.
By processing method!
Coolant filtration system(at sentence-end, falling tone) indicates a confident conclusion
recommendation3 selections
en_USEN